Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 18.06.2025 03:13

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Here is a simplified AC power diagram.

The bolt then partially travels down the line to your home.

There are three different concepts here that are getting confused.

What do you think are the real reasons Matt Gaetz just withdrew his name for Attorney General in the upcoming Trump administration?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This device then solves the entire problem.

One

How should one handle a situation where they suspect their partner of cheating, but their partner denies it and claims it is all in their head?

The MOV will conduct when the voltage exceeds 50% of line voltage.

It seems Mohan does not understand the difference between a comment and an Answer.

This is 'the assistant's answer'

Why do siblings (or other close relatives) stop visiting each other as they grow older? Why does this happen with so many people nowadays?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

a photo is worth a thousand words.

There are two important concepts here.

Why do people hate Nickelback so much? What makes them different from other popular bands like Linkin Park, Green Day, etc.? Is it just because they're Canadian or what?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

2024–10–10[John johnson John Johnson ]

What does it feel like to "lose your looks" to age?

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

I post the exact comment here.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

In your opinion, what is the worst rock band in history and why do you think they gained a large following?

He then describes Rainy Season and Lightning.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Edit 2024–10.

How do I get fit at home?

what exactly is a ‘surge’ protector?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

She Spotted a Detail in a Photo and Knew Immediately—Her Marriage Was Over - Jason Deegan

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

These are simplified answers to the original question, and does not change anything I wrote above.

nine

What is the reason for the high number of stray dogs in Thailand? What measures are being taken to address this issue?

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

so, what happens?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

I'm a 28-year-old guy who has never been in a relationship, nor can I seem to find someone who wants to be in one with me. Why do I feel like a freak?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

What is lightning?

but this device (an Inductor) … impedes the rapid changes in the current.

Have you been arrested or investigated?

2024–10–16 [ OO OLAOYE OYEBODE ]

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

In schematic diagrams this is the symbol for a fuse:

What pet would you strongly not recommend?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

A fuse is a non-resetable over current circuit protector.

eight

What a list actors/ actresses are notorious for being jerks in real life?

2024–10–14 [Omar Gharbi Omar Gharbi ]

Upvotes:

It also is a device that limits the change in current flow.

Can you share summer photos? Day 8

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

[image of Common-mode choke]

A circuit breaker is similar, but is resettable.

Why cant school buses ditch kids who are late to the bus at the school? Like on the way home, if a kid is late when all the others arrived to the bus on time, why cant they leave the late kid behind since its not fair to the on time kids to wait?

but I think this circuit , shows a few more pieces.

The other is “what does a “fuse” do?”

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

He then describes the function of a fuse.

But it can get overloaded, and no longer works.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

What does a fuse do?

Because the load is inductive, the current lags the voltage.(by a bit).

This is where the MOV conducts again, and dissipated the energy.

The third is lightning and “how it gets conducted into a home.”

Barnstars:

These devices are installed between the “hot” and “neutral” and protective ground.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

But… the neutral is now “floating” because of the 1 ohm resistance.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

An AC voltage/ current source, and an ac inductive load.

For this case there are devices called Metal oxide varistors (MOV).

Now when you have a certain ac resistance, then a current flows in a loop.

[old diagram got deleted by accident]

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

At least they know the answer if they wanted it.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

He then asserts :

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

At one ohm, the resistor has a maximum of 1 watt power.

First Sentence:

One is “what exactly is in a ‘surge protector’ ? ”

This one hit behind the barn.

So, the voltage could go up to 500 volts, and the fuse will not open up.

the problem then depends on "how fast does the fuse operate?".

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

(Dc diagram shown, AC is similar).

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This is where this question deviates from being a 'generic' question, and becomes more specific.